• Email: sales@rumotek.com
  • 18 Years Factory Round Strong Permanent Magnet - AlNiCo Magnet – Rumotek

    Short Description:


    Product Detail

    Product Tags

    Related Video

    Feedback (2)

    We stick with the theory of "quality first, company first, steady improvement and innovation to satisfy the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our provider, we deliver the items together with the fantastic good quality at the reasonable value for Ferrite Magnet Properties, Magnetic Separator, Smco Electric Meter Magnet, Welcome to build long-term marriage with us. Finest Rate Forever High-quality in China.
    18 Years Factory Round Strong Permanent Magnet - AlNiCo Magnet – Rumotek Detail:

    Cast AlNiCo Magnet Physical Properties
    Material Grade Remanence Rev. Temp.-Coeff. Of Br Coercivity Rev. Temp.-Coeff. Of Hcj Max. Energy  Product Max. Operating Temperature Density
    Br (KGs) Hcb (KOe) (BH)max.  (MGOe) g/cm³
    Isotropic LN9 6.8 -0.03 0.38 -0.02 1.13 450℃ 6.9
    Isotropic LN10 6.0 -0.03 0.50 -0.02 1.20 450℃ 6.9
    Isotropic LNG12 7.2 -0.03 0.50 +0.02 1.55 450℃ 7.0
    Isotropic LNG13 7.0 -0.03 0.60 +0.02 1.60 450℃ 7.0
    Isotropic LNGT18 5.8 -0.025 1.25 +0.02 2.20 550℃ 7.3
    Anisotropic LNG37 12.0 -0.02 0.60 +0.02 1.65 525℃ 7.3
    Anisotropic LNG40 12.5 -0.02 0.60 +0.02 5.00 525℃ 7.3
    Anisotropic LNG44 12.5 -0.02 0.65 +0.02 5.50 525℃ 7.3
    Anisotropic LNG52 13.0 -0.02 0.70 +0.02 6.50 525℃ 7.3
    Anisotropic LNG60 13.5 -0.02 0.74 +0.02 7.50 525℃ 7.3
    Anisotropic LNGT28 10.8 -0.02 0.72 +0.03 3.50 525℃ 7.3
    Anisotropic LNGT36J 7.0 -0.025 1.75 +0.02 4.50 550℃ 7.3
    Anisotropic LNGT32 8.0 -0.025 1.25 +0.02 4.00 550℃ 7.3
    Anisotropic LNGT40 8.0 -0.025 1.38 +0.02 5.00 550℃ 7.3
    Anisotropic LNGT60 9.0 -0.025 1.38 +0.02 7.50 550℃ 7.3
    Anisotropic LNGT72 10.5 -0.025 1.40 +0.02 9.00 550℃ 7.3
    Sintered AlNiCo Magnet Physical Properties
    Material Grade Remanence Rev. Temp.-Coeff. Of Br Coercivity Coercivity Rev. Temp.-Coeff. Of Hcj Max. Energy Product Max. Operating Temperature Density
    Br (KGs) Hcb (KA/m) Hcj (KA/m) (BH)max. (KJ/m³) g/cm³
    Isotropic SALNICO4/1 8.7-8.9 -0.02 9-11 10-12 -0.03~0.03 3.2-4.8 750℃ 6.8
    Isotropic SALNICO8/5 5.3-6.2 -0.02 45-50 47-52 -0.03~0.03 8.5-9.5 750℃ 6.8
    Isotropic SALNICO10/5 6.3-7.0 -0.02 48-56 50-58 -0.03~0.03 9.5-11.0 780℃ 6.8
    Isotropic SALNICO12/5 7.0-7.5 -0.02 50-56 53-58 -0.03~0.03 11.0-13.0 800℃ 7
    Isotropic SALNICO14/5 7.3-8.0 -0.02 47-50 50-53 -0.03~0.03 13.0-15.0 790℃ 7.1
    Isotropic SALNICO14/6 6.2-8.1 -0.02 56-64 58-66 -0.03~0.03 14.0-16.0 790℃ 7.1
    Isotropic SALNICO14/8 5.5-6.1 -0.01 75-88 80-92 -0.03~0.03 14.0-16.0 850℃ 7.1
    Isotropic SALNICO18/10 5.7-6.2 -0.01 92-100 99-107 -0.03~0.03 16.0-19.0 860℃ 7.2
    Anisotropic SALNICO35/5 11-12 -0.02 48-52 50-54 -0.03~0.03 35.0-39.0 850℃ 7.2
    Anisotropic SALNICO29/6 9.7-10.9 -0.02 58-64 60-66 -0.03~0.03 29.0-33.0 860℃ 7.2
    Anisotropic SALNICO32/10 7.7-8.7 -0.01 90-104 94-109 -0.03~0.03 33.0-38.0 860℃ 7.2
    Anisotropic SALNICO33/11 7.0-8.0 -0.01 107-115 111-119 -0.03~0.03 33.0-38.0 860℃ 7.2
    Anisotropic SALNICO39/12 8.3-9.0 -0.01 115-123 119-127 -0.03~0.03 39.0-43.0 860℃ 7.25
    Anisotropic SALNICO44/12 9.0-9.5 -0.01 119-127 124-132 -0.03~0.03 44.0-48.0 860℃ 7.25
    Anisotropic SALNICO37/15 7.0-8.0 -0.1 143-151 150-158 -0.03~0.03 37.0-41.0 870℃ 7.2
     Note:
    · We remain the same as above unless specified from customer. Curie temperature and temperature coefficient are for reference only, not as a basis for decision.
    · The maximum working temperature of magnet is changeable due  to ratio of length and diameter and environment factors.

    Feature:
    1. AlNiCo magnet has high remanent induction but low coercivity. It works stable at extreme temperature, maintaining its magnetic characteristics between

    –250ºC and 550ºC. Based on superior magnetic induction, it is largely used in measuring equipment and detection systems.

    2. Alnico is a fragile material and can only be altered during the casting process. Orientation of it achieved during heat treatment, producing a magnetic field

    with the defined magnetization direction.

    3. Due to the low coercive force, AlNiCo magnets can be easily affected by reverse magnetic force and impact of iron. That’s why they can be easily demagnetized

    by external influences. For this reason, AlNiCo magnets should not be stored and packed with the same poles opposing to each other.

    4. In open circuit, the ration of length/diameter (L/D) should be at least 4:1. With shorter length

    5. AlNiCo magnets behave well against oxidation. No coating required for surface protection.

     

    Applications:
    Use in high sensitivity products such as Instruments, Meters, Mobile Phones, Automobile parts. Electroacoustic devices, Motors, Teaching and Aerospace

    military, etc.

    All stated values were determined using standard samples according IEC 60404-5. The following specifications serve as reference values and may differ.

     

     

     


    Product detail pictures:

    18 Years Factory Round Strong Permanent Magnet - AlNiCo Magnet – Rumotek detail pictures

    18 Years Factory Round Strong Permanent Magnet - AlNiCo Magnet – Rumotek detail pictures


    Related Product Guide:
    Cooperation

    With a sound business credit, excellent after-sales service and modern manufacturing facilities, we have earned an excellent reputation among our customers across the world for 18 Years Factory Round Strong Permanent Magnet - AlNiCo Magnet – Rumotek , The product will supply to all over the world, such as: Mozambique, Botswana, Bangladesh, We welcome you to visit our company, factory and our showroom displayed various products that will meet your expectation, meanwhile, it is convenient to visit our website, our sales staff will try their efforts to provide you the best service. If you need more information, please do not hesitate to contact us by E-mail or telephone.
  • It can be said that this is a best producer we encountered in China in this industry, we feel lucky to work with so excellent manufacturer.
    5 Stars By Althea from Marseille - 2018.06.18 17:25
    In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.
    5 Stars By Samantha from Sri Lanka - 2018.11.04 10:32
    Write your message here and send it to us