• Email: sales@rumotek.com
  • Factory wholesale Countersunk Hole Smco Ring Magnet - Sintered NdFeB – Rumotek

    Short Description:


    Product Detail

    Product Tags

    Related Video

    Feedback (2)

    We love an incredibly fantastic standing amid our consumers for our superb item high quality, aggressive rate and also the finest assistance for Block Sintered Smco Magnet, Ndfeb Sphere Magnet, Cylinder Magnet With Hole, Welcome worldwide customers to contact us for business and long-term cooperation. We will be your reliable partner and supplier.
    Factory wholesale Countersunk Hole Smco Ring Magnet - Sintered NdFeB – Rumotek Detail:

    Introduction:
    Neodymium magnets (NdFeB) – rare earth permanent magnet composed of neodymium, iron and boron, China began the domestic mining of these in the 1980s. NeFeB magnets are compressed and sintered in a protective atmosphere. If processes are not controlled well, it will lead to quality defect due to corrosion. At SURTIME, we exclude these problems right from the start by carrying quality controls and we consider to be an indispensable part, not only on the end product but also during the critical processes on site.
    Advantage:
    The properties of these magnets are far superior to traditional ones and they are currently the most powerful in application. Their high coercivity and high remanence allow the new design and the possibility of increasing magnetic field of application where space is limited or where a strong magnetic field required. NdFeB magnets are very susceptible to corrosion. Therefore require a protective surface coating. Uses of NdFeB magnet are conditioned by the temperature in a wide range running from 80ºC to 230ºC. And also it works at temperature below 0℃.
    Application:
    Neodymium magnets are used as various types of magnetic lenses for focusing, deflection of charged particles in electronics, brake systems, drip, sensor, magnetic system in rotor and micro motors, and field of science, medicine (tomography, NMR spectrometers), etc.
    Today, NdFeB magnets are used in large quantities all over the world. The development of this material is not yet complete; the remanence and coercive field strength are being continually increased. The high energy of NdFeB magnets means that motors and sensors can be built ever smaller – and this signifies an increase in performance efficiency. The ongoing improvements enable this interesting material to be continually introduced into new areas. All stated values were determined using standard samples according IEC 60404-5. The following specifications serve as reference values and may differ. For more information please contact our application engineers.

    Sintered NdFeB Magnet Physical Properties
    Grade Remanence Rev. Temp.- Coeff. Of Br Coercive Force Intrinsic Coercive Force Rev. Temp.-    Coeff. Of Hcj Max. Energy Product Max. Operating Temperature Density
    Br (KGs) Hcb (KOe) Hcj (KOe) (BH)max. (MGOe) g/cm³
    N35 11.7-12.2 -0.11~-0.12 ≥10.9 ≥12 -0.58~-0.78 33-36 80℃ 7.6
    N38 12.2-12.5 -0.11~-0.12 ≥11.3 ≥12 -0.58~-0.78 36-39 80℃ 7.6
    N40 12.5-12.8 -0.11~-0.12 ≥11.5 ≥12 -0.58~-0.78 38-41 80℃ 7.6
    N42 12.8-13.2 -0.11~-0.12 ≥11.5 ≥12 -0.58~-0.78 40-43 80℃ 7.6
    N45 13.2-13.8 -0.11~-0.12 ≥11.6 ≥12 -0.58~-0.78 43-46 80℃ 7.6
    N48 13.8-14.2 -0.11~-0.12 ≥11.6 ≥12 -0.58~-0.78 46-49 80℃ 7.6
    N50 14.0-14.5 -0.11~-0.12 ≥10.0 ≥12 -0.58~-0.78 48-51 80℃ 7.6
    N52 14.3-14.8 -0.11~-0.12 ≥10.0 ≥12 -0.58~-0.78 50-53 80℃ 7.6
    N33M 11.3-11.7 -0.11~-0.12 ≥10.5 ≥14 -0.58~-0.72 31-33 100℃ 7.6
    N35M 11.7-12.2 -0.11~-0.12 ≥10.9 ≥14 -0.58~-0.72 33-36 100℃ 7.6
    N38M 12.2-12.5 -0.11~-0.12 ≥11.3 ≥14 -0.58~-0.72 36-39 100℃ 7.6
    N40M 12.5-12.8 -0.11~-0.12 ≥11.6 ≥14 -0.58~-0.72 38-41 100℃ 7.6
    N42M 12.8-13.2 -0.11~-0.12 ≥12.0 ≥14 -0.58~-0.72 40-43 100℃ 7.6
    N45M 13.2-13.8 -0.11~-0.12 ≥12.5 ≥14 -0.58~-0.72 43-46 100℃ 7.6
    N48M 13.6-14.3 -0.11~-0.12 ≥12.9 ≥14 -0.58~-0.72 46-49 100℃ 7.6
    N50M 14.0-14.5 -0.11~-0.12 ≥13.0 ≥14 -0.58~-0.72 48-51 100℃ 7.6
    N35H 11.7-12.2 -0.11~-0.12 ≥10.9 ≥17 -0.58~-0.70 33-36 120℃ 7.6
    N38H 12.2-12.5 -0.11~-0.12 ≥11.3 ≥17 -0.58~-0.70 36-39 120℃ 7.6
    N40H 12.5-12.8 -0.11~-0.12 ≥11.6 ≥17 -0.58~-0.70 38-41 120℃ 7.6
    N42H 12.8-13.2 -0.11~-0.12 ≥12.0 ≥17 -0.58~-0.70 40-43 120℃ 7.6
    N45H 13.2-13.6 -0.11~-0.12 ≥12.1 ≥17 -0.58~-0.70 43-46 120℃ 7.6
    N48H 13.7-14.3 -0.11~-0.12 ≥12.5 ≥17 -0.58~-0.70 46-49 120℃ 7.6
    N35SH 11.7-12.2 -0.11~-0.12 ≥11.0 ≥20 -0.56~-0.70 33-36 150℃ 7.6
    N38SH 12.2-12.5 -0.11~-0.12 ≥11.4 ≥20 -0.56~-0.70 36-39 150℃ 7.6
    N40SH 12.5-12.8 -0.11~-0.12 ≥11.8 ≥20 -0.56~-0.70 38-41 150℃ 7.6
    N42SH 12.8-13.2 -0.11~-0.12 ≥12.4 ≥20 -0.56~-0.70 40-43 150℃ 7.6
    N45SH 13.2-13.8 -0.11~-0.12 ≥12.6 ≥20 -0.56~-0.70 43-46 150℃ 7.6
    N28UH 10.2-10.8 -0.11~-0.12 ≥9.6 ≥25 -0.52~-0.70 26-29 180℃ 7.6
    N30UH 10.8-11.3 -0.11~-0.12 ≥10.2 ≥25 -0.52~-0.70 28-31 180℃ 7.6
    N33UH 11.3-11.7 -0.11~-0.12 ≥10.7 ≥25 -0.52~-0.70 31-34 180℃ 7.6
    N35UH 11.8-12.2 -0.11~-0.12 ≥10.8 ≥25 -0.52~-0.70 33-36 180℃ 7.6
    N38UH 12.2-12.5 -0.11~-0.12 ≥11.0 ≥25 -0.52~-0.70 36-39 180℃ 7.6
    N40UH 12.5-12.8 -0.11~-0.12 ≥11.3 ≥25 -0.52~-0.70 38-41 180℃ 7.6
    N28EH 10.4-10.9 -0.105~-0.120 ≥9.8 ≥30 -0.48~-0.70 26-29 200℃ 7.6
    N30EH 10.8-11.3 -0.105~-0.120 ≥10.2 ≥30 -0.48~-0.70 28-31 200℃ 7.6
    N33EH 11.3-11.7 -0.105~-0.120 ≥10.5 ≥30 -0.48~-0.70 31-34 200℃ 7.6
    N35EH 11.7-12.2 -0.105~-0.120 ≥11.0 ≥30 -0.48~-0.70 33-36 200℃ 7.6
    N38EH 12.2-12.5 -0.105~-0.120 ≥11.3 ≥30 -0.48~-0.70 36-39 200℃ 7.6
    N28AH 10.4-10.9 -0.105~-0.120 ≥9.9 ≥33 -0.45~-0.70 26-29 230℃ 7.6
    N30AH 10.8-11.3 -0.105~-0.120 ≥10.3 ≥33 -0.45~-0.70 28-31 230℃ 7.6
    N33AH 11.3-11.7 -0.105~-0.120 ≥10.6 ≥33 -0.45~-0.70 31-34 230℃ 7.6

    Note:
    · Under working temperature 20℃±2℃, above magnetic parameters and physical properties are tested, with inevitable loss of magnetic force no more than 5%.
    · The maximum working temperature of magnet is changeable due to ratio of length and diameter and environment factors.


    Product detail pictures:

    Factory wholesale Countersunk Hole Smco Ring Magnet - Sintered NdFeB – Rumotek detail pictures

    Factory wholesale Countersunk Hole Smco Ring Magnet - Sintered NdFeB – Rumotek detail pictures

    Factory wholesale Countersunk Hole Smco Ring Magnet - Sintered NdFeB – Rumotek detail pictures


    Related Product Guide:
    Cooperation

    To be a result of ours specialty and service consciousness, our enterprise has won an excellent status between buyers all around the globe for Factory wholesale Countersunk Hole Smco Ring Magnet - Sintered NdFeB – Rumotek , The product will supply to all over the world, such as: India, Greenland, Morocco, With the goal of "zero defect". To care for the environment, and social returns, care employee social responsibility as own duty. We welcome friends from all over the world to visit and guide us so that we can achieve the win-win goal together.
  • The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
    5 Stars By Edwina from Swedish - 2017.10.23 10:29
    We have been looking for a professional and responsible supplier, and now we find it.
    5 Stars By Annie from Mauritius - 2018.09.21 11:01
    Write your message here and send it to us